Gå direkt till innehållet
Cross-linked Polymers as Dielectrics for Organic Field-effect Transistors
Spara

Cross-linked Polymers as Dielectrics for Organic Field-effect Transistors

Författare:
pocket, 2013
Engelska
Organic electronics are getting more and more interest from industrial companies and research groups in the last years since they enable many new applications, which could not be realized by inorganic materials 1{7]. Flexible displays 1], large-area sensors 1], light-emitting large surfaces 8], printable radio-frequency identification tags (RFID) for packaging or logistic industry 2] and many other systems which require exible, large area and low-cost electronic devices are now developed for the near future or even already commercialized. Organic light-emitting-diode (OLED) displays, for example, are now implemented in portable devices and have higher performance than the traditional LCD displays 9]. OLED displays are self illuminating and do not need back lightening, therefore they have higher brightness, contrast and viewing angle in comparison to LCD displays 9]. Many electronic devices producers implemented OLED displays in their high-end smartphones and SLR cameras 10], and recently LG (a Korean company) introduced a 55-inch OLED television 11]. Large-area solar cells based on organic materials have also found their way to commercialization 12]. All of these innovations were only possible after the introduction of organic conductors and semiconductors. Organic (semi)-conductors have the advantage of their low-cost processing technologies (e.g. printing or spray-coating). However, they have lower electrical conductivity, free charge carriers mobility 13] and packaging density than their inorganic counterparts. Therefore they are normally used in lowcost and low-performance applications, except in the case of OLED where they have clear advantages compared with other technologies. In order to produce fully exible devices, elementary devices for electronic circuits (e.g. transistors and diodes) need to be made with exible materials. The performance of these devices needs to be enhanced and their fabrication processes should be optimized to ensure their c
Författare
Zied Fahem
ISBN
9783954045617
Språk
Engelska
Vikt
141 gram
Utgivningsdatum
2013-11-21
Förlag
Cuvillier
Sidor
112